How To Wax A Snowboard? Tips From The Pros

Spread the love

Whether you’re a seasoned snowboarder or just starting out, learning how to properly wax your board is an essential skill. Waxing not only helps your board glide smoothly and faster, but also protects the base from damage caused by friction and moisture.

So, where do you start? With so many types of waxes, tools, and techniques available, it can be overwhelming. That’s why we’ve gathered tips from professional snowboarders to help guide you through the process.

“Waxing your board will make all the difference in the world when riding. It adds speed, protection, and longevity to your equipment.” -Chloe Kim

In this article, you’ll learn everything from choosing the right wax for your board and the importance of cleaning your board before waxing, to step-by-step instructions on how to apply and scrape the wax. We’ll also cover some common mistakes to avoid and answer some frequently asked questions about waxing.

By the end of this article, you’ll have the knowledge and confidence to wax your own snowboard like a pro and hit the slopes with a smoother ride! So grab your gear and let’s get started!

Preparation Is Key

Gather All Necessary Materials

To successfully wax your snowboard, you will need a few things. Some of these items can be found at home while others you may have to purchase from a local sports store or ski shop. Here’s a list of essential materials you’ll need:

  • Snowboard wax – preferably all-temperature.
  • A scraper tool – this helps in removing excess wax from the board.
  • A waxing iron – an adjustable temperature iron designed specifically for snowboards. Make sure it has no gaps and is polished evenly.
  • A towel – used to wipe off the base after cleaning and before waxing.
  • A soft nylon brush – helps in removing dirt and debris from the board before waxing.
  • Paper towels – used in wiping down the edges and holding them tightly.

Clean The Surface

The first step in any waxing process is starting with a clean slate. You need to start by cleaning the whole surface, including the sidewalls and edges, to allow for maximum effectiveness. Dirt and debris left on the board’s base prevent proper penetration of the wax into the pores. Therefore leaving your board with substandard performance on the slopes and will wear or tear more quickly than those that are well-maintained.

You can get rid of stubborn stains using citrus-based cleaners, which removes grease and grime without harming any part of the structure. If your snowboard is new, then make sure to cover the manufacturer’s sticker to avoid any fading. Remember not to use aggressive solvents like acetone since they destroy the plastic peripheral areas along with the graphics.

“Cleaning out the debris and dirt from your snowboard surface is essential before applying wax for better performance of your board.” -TheGoodRide

After cleaning, wipe down the base with a towel to make sure it’s dry. You can as well use an air compressor or hairdryer to get rid of excess water in corners that are hard to reach.

Gently run your hands through the edges to remove any remaining dirt. Once you’ve removed everything, cover them using paper towels and rub gently to keep them tight until done.

Choosing The Right Wax

If you are an avid snowboarder, then you know how important it is to keep your board in top shape. One of the most essential parts of snowboard maintenance is waxing. Not only does it make your board look good, but it also enhances its performance on the slopes by improving glide and speed.

Determine Your Skill Level

The first step in choosing the right wax for your snowboard is determining your skill level. If you are a beginner or intermediate rider, then an all-temperature wax will suffice. However, if you’re an advanced rider looking for high-performance, you’ll want to opt for a specialized wax designed for specific temperature ranges and conditions.

“Choosing the right wax can have a significant impact on your performance and experience on the mountain.” -The Good Ride

Consider The Temperature

The temperature of the snow has a significant impact on your board’s performance, which is why selecting the correct type of wax is crucial. A universal temperature wax should be used when the temperature is between 0°C and -6°C. For warmer temperatures, use a warm-weather wax and for colder temperatures, use cold-weather wax.

“Temperature-specific wax helps maintain your board’s integrity through optimal gliding on the snow. ” -Snow Magazine

Choose The Right Type Of Wax

Not all waxes are created equal. There are three main types of wax available in the market: paraffin wax, fluorocarbon wax, and hydrocarbon wax.

  • Paraffin Wax: It is the most common type of snowboard wax. Its affordability and ease of application make it a popular choice among snowboarders.
  • Fluorocarbon Wax: It is the most expensive type of wax that offers exceptional performance in wet conditions, especially on man-made or granular snow.
  • Hydrocarbon Wax: It is an affordable option for those who want to maintain their board and keep it gliding well without breaking the bank.
“The right choice of wax can make a huge difference when it comes to increasing the lifespan and performance of your equipment.” -Salomon Snowboards

Decide Between Hard Wax And Soft Wax

The last decision you’ll have to make is choosing between hard wax and soft wax. Hard wax has a higher melting point, making it more durable but harder to apply. On the other hand, soft wax is easier to apply, but it melts easily, requiring frequent application. For beginners, we recommend starting with soft wax as it’s easy to work with and produces excellent results while learning to wax. If you’re looking for something more robust, a hard wax would be better suited.

“Choosing the best wax for your snowboard is essential, but it also depends on personal preference.” -REI Co-op

By following these guidelines, you should be able to select the right wax to enhance your snowboarding experience. Remember, proper maintenance will ensure that your board lasts longer and performs at its best. So, take care of your board to enjoy a great ride every time!

The Waxing Process

Heat The Wax

The first step in waxing your snowboard is to heat up the wax. You can use a wax iron, which is specific for melting wax onto your board at the perfect temperature. It is important that you do not overheat and burn the wax so set the iron’s temperature between 120-180 degrees Celsius.

You should also make sure that the room has good ventilation because inhaling wax fumes could be harmful to your health over time.

Apply The Wax

After heating the wax, you can apply it to your board’s base using the same wax iron. Start by drip wax on along the base lengthwise then melt and spread the wax around with your iron ensuring everything is evenly distributed.

Make sure you get into every nook and cranny of your board’s base including all edges too. Apply enough wax as needed, but try not to overdo it – just a thin layer on top surfaces would suffice. Keep in mind that some waxes are durable in low temperatures whilst others last for high temperature weather conditions, read the labels before deciding on one.

Remove The Wax

Once you have covered the entire surface, it is time to remove excess wax. Using a plastic scraper will help you take off any extra wax from the board without causing damage to its underside or edges. Run the scraper firmly against the board’s base in short strokes to remove extra wax.

Also make sure there are no patches left out of place if they were not scraped enough. Wipe these areas down with soft cotton or microfiber cloth. These materials work best alongside edge-specific brushes that clean off wax remnants at the corners of your snowboard.

“Preventing snowboard base damage starts with waxing the board regularly at home during the season. Wax acts like sunscreen for your board…” -Pro Tips

By following these simple steps outlined above on how to wax a snowboard, you can keep your board in tip-top condition and enjoy great riding experience always.

Scraping And Buffing

If you want to keep your snowboard in top condition, it’s important to wax it regularly. Not only will this help to protect the base from damage caused by friction, but it will also improve your speed and control on the slopes.

Scrape Off Excess Wax

The first step in waxing a snowboard is to get rid of any old wax that might be stuck to the surface. To do this, you’ll need a metal scraper or a plastic scraper. Start at one end of the board and apply firm pressure as you move down towards the other end. Be sure to remove all the wax from the edges as well. If there are any stubborn bits left behind, use the corner of the scraper to scrape them off.

“Once I got the wax kit, my board started charging through powder like clouds parting.” -John Jackson

It’s important to note that you should always scrape lengthwise along the board rather than across it. This will prevent any hard edges in the scraper from damaging the base.

Buff The Surface

After you’ve removed the old wax, it’s time to start applying the new wax. Begin by heating up the iron and placing the wax against it. Once the wax has melted, drip it over the base of the snowboard. Use just enough wax so that it covers the entire surface, but not so much that it starts dripping down the sides.

Now that the wax is evenly distributed, take the iron and spread the wax around until it’s covering every inch of the base. Make sure to keep the temperature low enough that the wax doesn’t burn. You can tell if the temperature is too high if the wax starts smoking.

“Waxing your snowboard is essential because it helps create a smoother ride and enhances performance.” -Surfer Today

Once you’ve distributed the wax, it’s time to let it cool down for about 20 minutes. After that, grab your scraper again and scrape off any bumps or excess wax that might have accumulated on the surface. Be sure to keep the scraper flat against the board so that you don’t scratch the base.

Check For Any Missed Spots

The last step in waxing a snowboard is to inspect the base one more time. Look closely at all areas of the base and check for any spots where wax might have been missed. If you do see any areas where no wax has been applied, simply apply another coat of wax, iron it in, let it cool down, and then scrape it off again.

“Waxing will keep the base of your board from drying out, cracking and thus help it last longer” -Mitchell Brown (Sports Manager at Kite Paddle Surf).

This final step is crucial since it ensures that the base of the board is completely covered with wax. By repeating this process until there are no missed spots left, you’ll be able to enjoy faster glides and better control while riding the slopes.

Post-Wax Maintenance

If you want your snowboard to glide smoothly and keep its wax for a long time, it is essential to perform periodic maintenance. Here are the three things that you should do after waxing your board:

Apply A Soothing Cream

After pulling off those strips of hair wax from your skin, you might experience redness or inflammation. In the same sense, exposing your newly-waxed snowboard to the cold air can dry out its base, resulting in cracks or other kinds of damage.

To preserve the quality of the snowboard’s surface and provide some extra care, apply a soothing cream designed for this specific purpose. These creams contain ingredients like menthol, peppermint oil, and aloe vera that have anti-inflammatory properties and leave a cooling sensation on your skin. Apply the cream evenly using a cloth or sponge and let it absorb into your board for at least ten minutes before hitting the slopes again.

“I always use Dakine Afterburner paste because besides reducing friction and adding another layer of protection for my board’s base, it has really helped me with irritation issues.” -Jenni Hendricks, professional snowboarder.

Avoid Certain Activities

Although you may be eager to test your freshly-waxed snowboard immediately, doing so could potentially lead to problems down the road. It would help if you avoided certain activities right after the process, as they can compromise the quality of the finish or even destroy the coating entirely.

  • Avoid riding on abrasive surfaces: Abrasive terrain such as rocks, trees, or ice chunks can quickly wear away the wax and lead to damage on your base.
  • Avoid soaking your board: Exposing your board to water or snow right after waxing can cause the coating to melt away and interfere with its performance factors.
  • Avoid overflexing your board: After waxing, it is essential to keep your board flat for at least 45 minutes to ensure that the wax sits well. Overbending the board or standing on it too soon can compromise the wax job’s quality.

If you let the wax settle in peacefully and avoid these activities during this period, you will be rewarded with a smooth ride full of speed and stability when you finally hit the hills again.

Exfoliate The Area

After waxing, there might still be some residues leftover on the surface of the board that could negatively impact the quality of the finish. Exfoliating helps get rid of those remains while helping the wax sink deeper into the base and form a more durable protective layer.

To exfoliate your board, use a plastic scraper specifically designed for this purpose and make long strokes along the length of your board’s base. Avoid using metal scrapers as they can scratch and damage your board’s surface, causing the wax to wear off quickly. Be sure to remove all waste chunks from the Snowboard before polishing it to maximize efficiency.

“To maintain my gear in perfect condition, I always use Bluebird Wax Scrape & Buff kit because their plastics are eco-friendly and versatile enough to work with different surfaces.” -Lukas Furlan, extreme sports photographer.

Maintaining post-wax care isn’t hard; it just requires a bit of extra effort compared to handling an unwaxed snowboard. However, by following these recommendations, you’ll have your equipment ready for those epic rides in no time.

Frequently Asked Questions

What materials do I need to wax my snowboard?

To wax your snowboard, you will need a waxing iron, a scraper, a cleaning solution, a soft cloth or brush, and of course, wax. You can choose between all-temperature wax or specific temperature wax, depending on the conditions you will be riding in. It’s important to have a clean workspace and a steady hand when applying the wax to your board.

What is the best wax to use on a snowboard?

The best wax to use on your snowboard will depend on the temperature and conditions you will be riding in. All-temperature wax is a good option for general use, but if you will be riding in specific conditions, such as cold weather or wet snow, you may want to choose a wax designed for those conditions. It’s important to choose a high-quality wax to ensure the best performance from your board.

How do I prepare my snowboard for waxing?

Before waxing your snowboard, you should clean the base with a cleaning solution and a soft cloth or brush. This will remove any dirt or debris that may interfere with the waxing process. Once the base is clean and dry, you can begin applying the wax evenly to the surface of the board. Make sure to cover the entire base and work the wax into the pores of the material.

What is the proper technique for applying wax to a snowboard?

The proper technique for applying wax to your snowboard involves heating the wax with a waxing iron and spreading it evenly over the base of the board. You should work the wax into the pores of the material to ensure maximum coverage. Once the wax is applied, you will need to let it cool and harden before scraping off the excess with a scraper. It’s important to be careful and precise when applying the wax to ensure the best performance from your board.

How long should I let the wax sit on my snowboard before scraping?

You should let the wax sit on your snowboard for at least 30 minutes before scraping off the excess. This will give the wax time to cool and harden, which will make it easier to remove. If you let the wax sit for too long, it may become too hard to scrape off, so it’s important to time this step carefully. Once you have scraped off the excess wax, you can buff the base with a soft cloth or brush to give it a smooth finish.

What is the best way to scrape excess wax off my snowboard?

The best way to scrape excess wax off your snowboard is to use a scraper, working from tip to tail in a smooth motion. You should apply firm pressure to the scraper to remove the excess wax, but be careful not to apply too much pressure or you may damage the base of the board. Once you have removed the excess wax, you can buff the base with a soft cloth or brush to give it a smooth finish.

Do NOT follow this link or you will be banned from the site!