Can You Remount Ski Bindings? Here’s What You Need to Know

Spread the love

If you’re a skier, then you know how important it is to have properly mounted ski bindings that keep your feet secure while you carve down the mountain. But what do you do if your current setup doesn’t work for you anymore? Can you remount your ski bindings and make adjustments?

The answer is yes! Remounting your ski bindings can be done, but there are some things you need to know before diving in. First of all, it’s important to understand why you might want to remount your bindings in the first place.

Perhaps you’ve changed boots and the new ones require different mounting positions. Maybe you’ve developed new skills or techniques and need a more customized setup. Or maybe you just didn’t get it right the first time and need to start fresh.

No matter the reason, understanding the process of remounting ski bindings can save you time, money, and frustration. It may also help increase your performance on the slopes and reduce your risk of injury.

“The proper adjustment and placement of ski bindings is crucial to both comfort and safety when skiing. The better suited your binding setup is to your individual needs, the better off you’ll be.” -Ski Industry Expert

In this article, we’ll cover the basics of remounting ski bindings, including tools needed, steps to take, and tips for success. By the end, you’ll have a better understanding of the process and feel confident tackling the job yourself or knowing when to seek professional help.

Reasons to Remount Ski Bindings

Improper Placement

If your ski bindings weren’t installed properly the first time around, or if they have become misaligned due to wear and tear, it’s important to remount them. Improper placement can cause a variety of problems, such as adding stress to certain parts of your skis that were not designed for it, reducing the responsiveness and control you have over your skis, and even increasing your risk of injury.

According to Ski Magazine, binding mounting errors are more common than people may think and can lead to unpredictable performance while skiing. Poorly aligned bindings can also put uneven pressure on knees, leading to severe injuries.

“Proper alignment of your ski boots in your ski bindings is critical to optimal carving and safety.”

Worn Out Bindings

Ski bindings can wear out faster than other parts of your equipment, especially if you use them frequently or do a lot of aggressive skiing. When ski bindings begin to wear out, they don’t grip your boot as well as they should, which can result in less control and stability when you’re skiing. In some cases, worn out bindings can even cause your ski to come off unexpectedly, which can be extremely dangerous and increases your chances of getting hurt on the slopes.

It’s recommended that bindings be replaced every 75-100 days of activity to ensure proper function and protection during your sport activities according to industry experts at REI Co-op.

“When you ski with outdated bindings, you compromise the integrity of your entire setup – from the maneuverability of your skis to the security of your foot/ankle region.” -On The Snow

It is necessary to remount your ski bindings if the original installer made errors or if they’ve suffered from wear and tear. Proper mounting ensures a better skiing experience, safer skiing conditions and an improved lifespan of your equipment.

Tools and Materials Needed for Remounting Ski Bindings


A screwdriver is a crucial tool needed for remounting ski bindings. You will need it to remove the old screws that secure the previous bindings in place. A Phillips head (star-shaped) screwdriver is the most common type used for most modern bindings, but some require a flathead screwdriver instead.


If your ski has been mounted multiple times, there’s a risk that you may encounter holes left by the old binding screws. In this case, you’ll need a drill to create new holes where this can be prevented.


You’ll also need a marker to mark the placement of the new bindings on your skis. The marker helps ensure that all the necessary measurements are correct before drilling or mounting begins.

New Bindings

Lastly, you will need new bindings. When choosing new bindings for your skis, consider factors such as weight, skill level, and intended use. It’s important to pick the right model of bindings that match with your skiing style so that they meet your personal requirements and preferences.

“The goal is not to have the newest technology on your feet, but rather one that fits your needs and ability.” -Tim Jitloff

Keep in mind that if you’re unsure about how to choose the right bindings, consult with an experienced professional ski technician who can help you select them based on the recommended guidelines based on specific ski manufacturers.

While having these tools and materials ready is essential when planning to remount ski bindings, keep in mind that it can be dangerous and complicated. Only attempt to mount ski bindings yourself if you have adequate knowledge and experience in doing so. If not, it is best to consult with a professional ski technician who can help you mount your bindings safely.

How to Remove Old Ski Bindings

Locate Screws

The first step in removing old ski bindings is to locate the screws that hold them in place. These screws are usually visible on the top of the binding plate and can be found behind the front and rear binding mechanisms.

It’s important to note that some older skis may have hidden screws, which require a bit more effort to find. In this case, you may need to remove stickers or decals to access the screws.

Unscrew Bindings

Once you’ve located the screws, use a screwdriver to unscrew each one. Be careful not to strip the screws as this will make it difficult to remove the bindings.

If the screws are stuck or difficult to turn, try applying a lubricant such as WD-40 to loosen them up. You can also gently tap the end of the screwdriver with a hammer to help break any stubborn corrosion or rust.

Remove Bindings

After all the screws are removed, the old bindings should easily slide off the ski. There may be some adhesive residue left on the ski, which can be removed with rubbing alcohol or acetone.

If the bindings still won’t budge, you can use a heat gun to warm the area around the binding plate. This will soften the adhesive and allow for easier removal.

Clean Skis

Finally, after the bindings are removed, it’s essential to clean the ski surface thoroughly. Use warm soapy water and a soft-bristled brush to clean away dirt, debris, and any leftover adhesive or residue from the old bindings.

Make sure to dry the skis completely before remounting your new ski bindings. Moisture and water can cause rust or damage to the skis over time.

“If you take care of your gear, it will take care of you.” – Jeremy Jones

Removing old ski bindings may seem intimidating at first, but with a few simple steps, it’s a task that any passionate skier can accomplish. By following these tips, you’ll have clean, prepared skis ready for your next trip down the mountain!

How to Install New Ski Bindings

Align Bindings

Before you can mount new ski bindings, you need to determine their location on the skis. Properly aligning the bindings is critical for your safety and performance when skiing. The most accurate way to do this is by taking your skis to a professional technician who will use special machines to align the bindings perfectly.

If you are installing the bindings yourself, there are a few steps you can follow to get a good alignment. First, make sure your skis are clean and dry. Then place the bindings in the correct position according to the manufacturer’s instructions. Use a ruler or measuring tape to ensure that the bindings are symmetrical to the center line of the skis. Use a marker to mark where the screws should go.

Mark Holes

Once you have marked where the screws should go, you need to insert some screws temporarily into the holes just to hold the binding in place. This acts as a guide for drilling the final holes. Check again for symmetry before proceeding with the next step.

The placement of the screw holes must be precise and depends on the type of binding being installed. Different manufacturers may have slightly different hole patterns, so it’s important to know which pattern corresponds to your particular bindings. Refer to the instruction manual for more precise guidelines about the exact location of the holes.

Drill Holes

Now it’s time to drill the holes. Make sure you choose a drill bit that is appropriate for the size and length of the screws needed for your bindings. A standard 3/16-inch drill bit would work for most mounting projects. Measure the depth of the holes required to accommodate the screws carefully and set the stop of the drill accordingly.

To ensure that you get a clean and accurate hole, it’s important to keep the drill perpendicular to the ski surface while drilling. Start with a low speed initially before gradually increasing it. Use a vacuum cleaner or compressed air to remove any debris from inside the holes after drilling.

“If in doubt about how to mount bindings on your skis, ask someone who knows what they’re doing.” -The Ski Journal

Finally, screw the binding tightly onto the drilled holes and check once again for accuracy and symmetry of the installation. Don’t forget to give everything one final inspection before hitting the slopes!

Mounting new ski bindings can be done yourself, but it is always recommended to entrust this job to professionals. Improperly installed bindings could cause injury, so don’t take chances if you have any doubts about your ability to mount them correctly. Always remember safety should be your priority when skiing.

When to Seek Professional Help for Ski Binding Remounting

Ski binding remounting is an essential process that requires proper expertise to avoid any accidents or damage. Most ski enthusiasts often wonder if they can handle the task independently, but this may not always be advisable. In some cases, you will need a professional to help you with your reinstallation needs. Here are some instances when you should seek expert assistance:

Complicated Skis

If your skis have complex designs or structures, it’s usually best to leave binding remounting to professionals. Expert technicians have the knowledge and experience necessary to assess the compatibility of different bindings with diverse ski models. They also understand how to handle unique features such as multiple mounting points on powder skis, making it easier to provide reliable repairs and support.

Professional service providers use high-tech equipment to measure the dimensions of various ski components, ensuring that each part fits perfectly before embarking on installation. This ensures your equipment performs optimally to minimize wear and tear while enhancing safety during skiing sessions.

The correct rotation angle is another crucial aspect of binding remounting procedures. Adjusting the angle incorrectly could lead to performance issues since different ski brands require different angles depending on their intended function. That said, consulting with a professional technician can help you determine the right specifications for your particular brand of skis to guarantee the best possible results.


Oftentimes, people who attempt DIY binding remounting without prior knowledge or training find themselves uncertain whether they did everything just right. If you’re unsure about installing bindings yourself, seeking professional assistance will be crucial for peace of mind. A specialist can inspect every component before installation to ensure they meet quality standards in terms of materials and compatibility.

“DIY ski binding remounting is risky business. If not done correctly, you could put yourself at risk or damage your gear.” -Doug Schnitzspahn

Additionally, if you have concerns about the stability of bindings on your skis after DIY installation, a professional technician can assess and correct any issues to ensure adequate support. This will enhance skiing performance while reducing the likelihood of accidents that might occur due to poorly installed equipment.

It’s possible to mount bindings independently, but only under certain circumstances when everything looks simple enough, and you’re confident in your expertise. However, for complex designs and mounting angles, or if you’re uncertain whether you did everything right, seeking expert assistance from certified ski technicians is always the safest option.

Frequently Asked Questions

Can ski bindings be remounted on different skis?

Yes, ski bindings can be remounted on different skis as long as they are compatible with the new skis. However, it is recommended to have a professional handle the remounting process to ensure proper alignment and safety.

What are the reasons for remounting ski bindings?

The main reasons for remounting ski bindings include changing ski size or type, adjusting for different boot sizes, or correcting improper initial mounting. Properly mounted bindings ensure optimal performance and prevent injury.

Is it possible to remount ski bindings on your own?

While it is technically possible to remount ski bindings on your own, it is not recommended. Improper mounting can lead to safety hazards and affect performance. It is best to have a professional handle the remounting process to ensure proper alignment and safety.

What are the safety concerns when remounting ski bindings?

The main safety concerns when remounting ski bindings include improper alignment, incorrect torque settings, and damage to the ski or binding. These issues can lead to reduced performance, injury, or even death. It is important to have a professional handle the remounting process to ensure safety.

How often should ski bindings be remounted?

There is no set timeframe for when ski bindings should be remounted. However, it is recommended to have them checked by a professional every few years or if there are any changes to the skis or boots. It is important to ensure proper alignment and safety for optimal performance and injury prevention.

Do NOT follow this link or you will be banned from the site!